Digital Camouflage part wrap printed graphics, to suit all medium to large sized cars. This kit is shown on a BMW M4, but will fit all similar-sized cars.
They are supplied in large sections of pre-spaced coloured squares, and can easily be adapted to fit different cars by trimming off or adding parts of the pattern wherever needed. Gaps in the graphics are clear, so the cars colour shows through.
- 2 x side camouflage graphics, in 6 pre-spaced pieces per side.
- 1 x bonnet & front bumper graphic, in 4 pre-spaced pieces.
- 1 x rear tailgate & bumper graphic, in 4 pre-spaced pieces.
- 1 x roof graphic, in 3 pre-spaced pieces.
- Trimming required around wheel arches, lights and windows.
This camouflage part wrap is laminated with a clear protective over-laminate vinyl to protect the printed image from damage and fading. The graphics are then contour-cut on a vinyl plotter and then application tape is applied to hold all the squares in place.
- High resolution prints.
- Vibrant, long-lasting colours.
- Re-positionable air-release vinyl for easy fitting (no air-bubbles).
Vinyl will conform to curves with some heat; heat gun or a hair dryer.
Please allow up to 1 week until we dispatch your order – making these graphics can be quite time-consuming!
Choose your colour combination from the menu below showing a standard range of colours. Custom colours are available, please contact us to discuss different colour options or choose from the menus.
Main colour: DARK GREY
Secondary colour: LIGHT GREY
Tertiary colour: RED
Since these decals are printed on our inkjet printer, we can print any one of thousands of colours (gloss only). We cannot print metallic or fluorescent colours. If you have a CMYK colour code of the colours you need we can print them to your specification.