Digitally printed vinyl bonnet / hood Bow Reaper Snowstorm camouflage wrap. There are no gaps or clear areas in this bonnet graphic, so this graphic can be fitted to any colour car or 4×4 truck.
These are high resolution prints, made on a high specification vinyl inkjet printer.
- 1 x custom-sized printed Bow Reaper Snowstorm camouflage bonnet wrap.
- Re-positionable air-release 5 year life vinyl for easy fitting.
- Laminated with a clear vinyl protective over-laminate film.
- Trimming is required around bonnet perimeter.
Use the drop-down menus below to choose the dimensions of your vehicle bonnet.
When measuring your bonnet, measure the widest parts as shown. Allow for the curve of the bonnet (you can use a tailors tape measure).
We will add a 25mm bleed onto the final print size to make it easier to position the graphic on the car.
PLEASE NOTE: We use 1350mm wide rolls of vinyl, so we cannot print if BOTH length AND width of the bonnet exceeds 1300mm. Eg we can print 2000mm x 1300mm, but cannot print 1400mm x 1400mm.
The graphic is supplied as a rectangle, the excess is trimmed off after fitting.
Please allow up to 5 working days for this item to be dispatched – items are made to order and the print needs 24 hours drying time before lamination.