Camper van graphics 139 – Compatible with Ducato – Relay – Boxer to Pinterest (opens in a new window)

Camper van graphics 139 – Compatible with Ducato – Relay – Boxer

£189.99

Description

Campervan / Motorhome graphics kits. These are ideal for giving your existing camper a new look or to finish off a new camper conversion project. They are sized to fit the Peugeot Boxer, Citroen Relay and the Fiat Ducato. Shown on the L3 (LWB) van. We can also make them to suit other wheelbase vans, from L1 to L4 – just choose the wheelbase length from the menus. The graphics will fit all Ducato / Relay / Boxer vans and facelift variants. There are no door handle cutouts, wheel arch or door line splits. These will require trimming during fitting.

NOTE: This kit is shown fitted to a van which has glass windows fitted to the sliding door (on both sides). The design intention is to visually disrupt that glass area, so we include vinyl that butts up against and overlays the glass. The white piece of vinyl which overlays the glass on the photo will need to be your van base colour, so add a message on the checkout page to confirm your van colour.

Following customer requests, we now have options to include pieces of black vinyl to fit into the window panel area to create the effect of a window. That piece will extend towards the cab and will require trimming around the cab window. If you have glass installed on just one side of the van, then you can add a piece of vinyl for the opposite side so both sides of the van match. Just select the relevant options from the drop-down menus.

Kit contents:

  • 2 x large side graphics, for both sides of the van (multiple pieces for each side).
  • Made from 5-7 year life outdoor grade vinyl, made specifically for vehicles & signs.
  • Each side is supplied in several smaller pre-spaced pieces for easier installation.
  • Gaps in the design are clear, so the van background colour shows through.
  • Available in a wide range of vinyl colours.
  • Large side graphics are normally split along the rear edge of the sliding door.
  • Covered in application tape.
  • Vinyl will not stick to black textured plastics.
  • See our fitting guide for more information on installation.
  • Matching front & rear graphics are listed in a separate category.

This is a 2 colour decal kit, shown on the bottom photo as:

First colour: BLACK
Second colour: LIGHT GREEN

Other colour combinations are available, please choose from the menu.