Snowboard vinyl wrap SB036-SB040

£39.99

Add sign applicator tool (squeegee)

SKU: Snowboard vinyl wrap SB036-SB040 Category: Tag:

Description

Give your Snowboard a fresh look with one of our digitally printed vinyl board wraps. They can be sized to fit any Snowboard. Our wraps are high resolution prints, made on a high specification vinyl inkjet printer and laminated for protection.

Kit contents:

  • 1 x CUSTOM-SIZED printed Snowboard wrap.
  • Re-positionable Avery AIR RELEASE vinyl for easy fitting (no air-bubbles).
  • Laminated with a clear vinyl protective over-laminate film.
  • Trimming is required around Snowboard perimeter.
  • High resolution prints.
  • Vibrant, long-lasting colours.

WHEN ORDERING PLEASE ADD A MESSAGE ON THE ORDER PAGE WITH YOUR BOARD DIMENSIONS AND THE DESIGN NUMBER. WE CANNOT MAKE YOUR ORDER UNTIL YOU SUPPLY THIS INFORMATION.

When measuring your board, measure the widest and longest parts.

We will add a 25mm bleed onto the final print size to make it easier to position the graphic on the board.

The graphic is supplied as a rectangle, the excess is trimmed off with a scalpel after fitting.

Please allow up to 3 working days for this item to be dispatched – items are made to order and the print needs 24 hours drying time before lamination.

Any novice fitter is able to install these graphics, although if you are unsure of your fitting capabilities we recommend that you contact us for some tips, watch youtube fitting guides or consult your local sign making company.

PLEASE NOTE:

AIR RELEASE VINYL IS FITTED DRY – NOT SUITABLE FOR A WET APPLICATION.